Download Print this page
JBL Eon 612 Quick Start Manual

JBL Eon 612 Quick Start Manual

Hide thumbs Also See for Eon 612:

Advertisement

Quick Links

360-836-0577
503-799-5964
info@wageraudio.com
QUICK START
GUIDE
JBL Eon
WAGER AUDIO
Connect with us1

Advertisement

loading

Summary of Contents for JBL Eon 612

  • Page 1 QUICK START GUIDE JBL Eon 360-836-0577 WAGER AUDIO 503-799-5964 info@wageraudio.com Connect with us1...
  • Page 2 Overview This simple sound system package includes two powered speakers, a small mixer, a wired mic, along with all speaker, mic, and power cables needed. Read on for helpful hints in putting the sound system together. WAGER AUDIO text: 503-799-5964 email: info@wageraudio.com...
  • Page 3: Speaker Stands

    1 Speaker stands Determine best speaker placement for your audience. Expand the tripod to a safe, wide stance. The silver tube should be out and secured in place. This is where the speaker mounts to the pole. Twist to raise, lower, or lock the stand in place.
  • Page 4 2 For each speaker Connect Input 1 cable with mixer, using “left” and “right” respective to each speaker Carefully place each speaker on Connect power tripod stand. cable (may SAFETY TIP: Ask a need provided friend to help! extension cord) NOTE: Keep the power switched off...
  • Page 5 3 Mixer Plug in mic cable(s) Plug cable from speakers starting with Channel 1 to “left” and “right” Power switch Plug cable from music source, if Connect power cable any (iPod, etc) WAGER AUDIO Master volume text: 503-799-5964 (red knob) email: info@wageraudio.com...
  • Page 6: Wireless Mic

    4 Microphone(s) WIRED MIC WIRELESS MIC minimum one included optional add-on Plug in the Plug in the opposite power cable Plug one end to mic end of a mic cable and the opposite end to the mixer (see of a mic cable to the previous page) mixer (see previous page)
  • Page 7 5 Powering up 1. Confirm the volume controls on mixer and speakers are turned all the way down. 2. Power up the mixer. 3. AFTER turning on mixer, set these three knobs on the back of the speakers to 12:00 position 3.
  • Page 8: Sound Check

    6 Sound check At this point, you should have cables connected and power to each piece of equipment. Play a track on your iPod, laptop, etc. to test you have music playback. Speak into each mic you have to ensure there is signal and sound.
  • Page 9 Can we improve this guide? Please share your feedback with us. info@wageraudio.com WAGER AUDIO text: 503-799-5964 email: info@wageraudio.com...