Mitsubishi Electric MSZ-GS30NA2 Operating Instructions Manual page 11

W
EEKLY TIMER OPERATION
3
Press , , and
temperature.
Pressing
selects ON/OFF timer.
Pressing
adjusts the time.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
Press and
other days and/or numbers.
4
Press to complete and transmit the weekly timer
setting.
Note:
• Press to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
after all the settings are complete. All the weekly timer settings will be saved.
• Press to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press to turn the weekly timer ON. (
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press again to turn the weekly timer OFF. (
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
to set ON/OFF, time, and
E.g. : [ON], [AM 6:00]
and [75°F
(24°C)] are
selected.
Pressing
adjusts the tem-
perature.
to continue setting the timer for
* which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
Checking weekly timer setting
1
Press to enter the weekly timer setting mode.
* blinks.
2
Press or
day or number.
Press
Note:
When all days of the week are selected to view the settings and a different set-
ting is included among them,
once
to view the setting of the particular
to exit the weekly timer setting.
will be displayed.
En-10