Table of Contents
Advertisement
Basic setting
autoOpen Dry
Wi-Fi
Remote start
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
3.
the display shows the required set-
ting.
Display text
Selection
1
o:02
o:00 - o:02
1
Cn:00
Cn:00 - Cn:01
1
rc:01
rc:00 - rc:02
rE:
Start with
.
repeatedly until
Description
Activate or deactivate automatic
opening of the appliance door during
the drying phase.
The following settings are possible:
¡ With the "o:00" setting, automatic
door opening is deactivated in all
programmes.
¡ With the setting "o:01" automatic
door opening is activated in all
programmes.
¡ With the "o:02" setting, automatic
door opening is only activated in
the Eco 50° programme.
→ "autoOpen Dry", Page 13
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Activate or deactivate remote start.
The following settings are possible:
¡ With the "rc:00" setting, remote
start is permanently deactivated.
¡ With the "rc:01" setting, remote
start can be selected via the re-
mote start button.
→ "Remote start ", Page 41
¡ With the "rc:02" setting, remote
start is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press
or
4.
display shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.
Basic settings en
repeatedly until the
39
Advertisement
Table of Contents
