Siemens SN45EW69CS User Manual page 48

Table of Contents

Advertisement

en Troubleshooting
Fault
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
E:92-40 will light up altern-
ately.
E:61-03 will light up altern-
ately. Water is not drained.
E:61-02 will light up altern-
ately.
E:90-01 will light up altern-
ately.
48
Cause
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
troubleshooting
Clean the filter.
6.
Re-insert the filter in the supply
7.
hose.
Screw the water connection back
8.
on.
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
→ "Cleaning filters", Page 44
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
and open if necessary.
Secure the cover of the "Wastewa-
ter pump " → Page 59 so it clicks
into position.
Clean the wastewater pump.
→ "Clean wastewater pump",
Page 59
Secure the cover of the "Wastewa-
ter pump " → Page 59 so it clicks
into position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.

Advertisement

Table of Contents
loading

Table of Contents