Device Connectors - EPOX EP-5NVA+SLI User Manual

Installation

3-5 Device Connectors

The I/O back panel for this mainboard is shown below. When installing the
mainboard into the computer case, use the bundled I/O shield to protect this back
panel.
PS/2
Mouse
PS/2
Keyboard
S/PDIF-out
S/PDIF-out
Coaxial Jack
Optical
JCPU_FAN
JPWR_FAN
CHIP_FAN
Page 3-10
Parallel Port
COM1
USB2.0 x 4 ports
<Figure 19> - I/O Ports
JCPU_FAN / JPWR_FAN / JSYS_FAN/CHIP_FAN:
CPU/Power/Chassis/Chip Fan Power Connectors
JCPU_FAN: The CPU must be kept cool by using a
JPWR_FAN: If you are installing an additional fan
JSYS_FAN: The chassis fan will provide adequate
JSYS_FAN
CHIP_FAN: If you are installing the chip fan in the
JCPU_FAN
Control
Sense
+12V
This mainboard is equipped with intelligent fan
speed control. Refer to the PC Health Status
submenu of the BIOS.
RJ45
LAN
heatsink with fan assembly.
in the unit, connect to this fan
connector.
airflow throughout the chassis to
prevent overheating the CPU.
unit, connect to this fan connector.
JPWR_FAN
Ground Sense
Sense Ground
+12V
7.1 Audio Channel
JSYS_FAN
CHIP_FAN
Ground
+12V
NC
Ground
+12V