Project Source FL-3212-4W-PS Manual page 7

ASSEMBLY INSTRUCTIONS
3. Tighten hex nut (stud application) or toggle bolt (wall
application) until pedestal basin is snug against the wall.
CAUTION: DO NOT OVER TIGHTEN AS THIS COULD
BREAK PORCELAIN. PLEASE NOTE: PEDESTAL
LEG SHOULD BE SUPPORTING THE PEDESTAL TOP,
SINCE MOUNTING LIPS ARE NOT DESIGNED TO
HOLD THE WEIGHT OF THE PEDESTAL TOP.
4. Apply a neat bead of bathroom silicone or caulking
between the pedestal basin and the wall and where the
pedestal basin connects onto the pedestal leg.
Complete any final plumbing connections such as lavatory
supply kit (not included).
3
4
7