Setting Up Tv Inputs - Mitsubishi Electric WD-57733 Owner's Manual

Initial TV Setup, continued
Change the Menu Language
Choose to display on-screen menus in either English or
Spanish (Español).
Select a menu language in the Setup menu.
1. With the Setup menu displayed, press
light the Language icon.
to highlight either English or Spanish.
2. Press
3. Press MENU to return the highlight to the top row of
icons.
Memorize Channels
For ANT 1/MAIN and ANT 2/AUX
To start channel memorization
1. With the Setup menu displayed, press
light the Scan icon.
2. Press to highlight an input selection based on
your connections:
Input Condition
Ant 1 Air When connected to an indoor or
Ant 2 Air outdoor antenna
Ant 1 Cable When connected to direct cable (no
Ant 2 Cable cable box)
to highlight the on-screen START button.
3. Press
4. Press ENTER to start automatic channel memoriza-
tion.
To stop channel memorization before
completion, press CANCEL.
Start channel memorization from the Setup menu.
5. When memorization is complete you can:
•
•
•
After channels have been memorized:
• To tune to memorized channels, press CH
while watching TV on the ANT 1 or ANT 2 inputs.
Use the Setup > Edit menu for additional channel
•
options, such as adding or deleting channels from
memory, naming channels, and saving favorite
channels in custom memory banks.
Additional TV Setup Using the Setup Menu
See chapter 5, "TV Menu Settings," to :
• Edit channel options
to high-
• Set the TV clock
• Set the TV Timer
• Select an Energy Mode to manage power use while
the TV is off.

Setting Up TV Inputs

When You First Connect a Device
to high-
This TV's Easy Connect® Auto Input Sensing feature
detects most connections automatically. When you
first connect a device, the TV will:
a. detect the connected device
b. prompt you to identify the device type
c. prompt you to perform NetCommand set-up for
d. repeat these steps for any additional newly
The tables below clarify which connections trigger Auto
Input Sensing.
Auto Detection Active
INPUT 1, 2, 3 video jacks
COMPONENT video jacks
*
HDMI
DIGITAL AUDIO OUT
AVR AUDIO OUTPUT (analog)
USB (USB photo port on front)
If the device is powered off when connected, detec-
*
tion occurs when the device is next powered on.
2. TV Setup
Press MENU once to return to the top row of icons.
Press MENU again to return to the Main menu.
Press EXIT to watch TV.
the device, if available (Y series and 734 series
only)
detected devices
No Auto Detection
ANT 1 and ANT 2
13
/