Inputs Menu - Mitsubishi Electric WD-57733 Owner's Manual

Inputs Menu

Note:
• NetCommand IR control of home-theater devices is
available on Y series and 734 series models only.
• When you change an input name in the Name
menu and then exit the Name menu:
The name is changed
The icon in the Input Selection menu is changed
Settings are changed to the defaults for the
new device type.
On models offering NetCommand control, all
"learning" for the input is also erased.
Inputs Menu Options
Cable Box,
Camcorder,
Name
DVD, DVD2,
DVR, Game,
HD Disc,
Satellite, VCR,
PC,
On/Off (ANT
1/ ANT 2 only)
Off (HDMI
only)
Put frequently used icons at the start of the Input Selection menu.
1. Press
Order
2. Press ENTER to confirm the selection.
3. Press
4. Press ENTER to set the new position.
Y series and 734 series only
•
Learn
•
See detailed instructions in chapter 6, "NetCommand."
Y series and 734 series only
Set up NetCommand control of an A/V receiver. This set-up allows you to:
AVR
•
•
See detailed instructions in chapter 6, "NetCommand."
• Assign or change names of inputs appearing in the Input Selection
menu.
• Turn Ant-1 and Ant-2 On or Off.
• Turn unused HDMI inputs Off.
• Press
• Press
• If you change the name of an input after performing NetCommand
"learning," the IR codes you "learned" are erased.
Note: When you disconnect an HDMI device, the icon remains in the Input
Selection menu until you remove it. To remove an unwanted HDMI icon,
select Off for the HDMI input.
to highlight the icon to move.
to drag the icon to the desired position.
Perform initial set-up of NetCommand control of a device.
Add or remove individual keys from NetCommand control of a device.
Operate the A/V receiver's power and volume functions with the TV's remote control.
Make the A/V receiver switch automatically to the correct audio input when you select a
device in the TV's Input Selection menu.
5. TV Menu Settings
Change input names using the Inputs > Name menu.
to move between inputs.
to select a name.
43