4.0 Flight guide
4.1 Flight preparation and turning the helicopter on/off
Black line
1. Install interface in correct polarity.
3. Turn on the transmitter.
5. Move the throttle stick fully up and after fully
down. The helicopter indicator lights will stop
flashing and turn solid indicating successful
pairing. The helicopter is ready to fly.
Red line
2. To turn on the helicopter, move the on/off
switch at the side of the helicopter to the ON
status/position. The power light will turn on.
4. Place the helicopter on the ground. Make sure
the rear end of the helicopter faces the pilot.
HEAD TAIL Horizontal position
6. To press the button-Auto take-off/ landing
button, which located at first button on the left
front side of remote control, and then the
helicopter is ready to fly.
8