SMFT-1000
Users Manual
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
solvents. Dirt or moisture in the terminals can affect readings.
To clean the terminals:
1. Turn off the PV Analyzer and remove all test leads.
2. Shake out any dirt that may be in the terminals.
3. Moisten a clean cotton swab with alcohol and clean the inside of each terminal.
Table 8
is a list of replaceable parts for the Tester.
W Fuse, FF 630 mA 1000 V IR 30 kA for PV Analyzer
Battery Holder
Battery Access Door
Fuse Replacement
To replace the fuse (see
1. Push
to turn off the PV Analyzer.
2. Remove the test leads from the terminals.
3. To remove the battery door, use a standard-blade screwdriver to turn the battery door
screws (x3) one-quarter turn counterclockwise.
4. Replace the fuse.
5. Replace the battery door.
6. Turn the battery door screws one-quarter turn clockwise to fasten the door.
7. The battery voltage shows in the secondary display.
To prevent possible electric shock or personal injury due to false readings:
Replace the batteries as soon as the
Be sure that the battery polarity is correct. A reversed battery can cause leakage.
42
Shop for Fluke products online at:
Table 8. Replacement Parts
Description
Figure
3):
XW Warning
MyFlukeStore
www.
empty battery icon appears.
.com
Part Number
5335526
1676850
5330087
1.888.610.7664