Electrical Wire Diagram - Pit Boss PRO Series Assembly And Operation Manual

The Digital Controller system is an intricate and valuable piece of technology. For protection from power surges and electrical
shorts, consult the wire diagram below to ensure your power source is sufficient for the operation of the unit.
PB – ELECTRIC REQUIREMENTS
INPUT: AC 110-120 V, 60 Hz, 3-PRONG GROUNDED PLUG
OUTPUT: DC 12V / 85W
NOTE: Electrical components, passed by product safety testing and certification services, comply
with a testing tolerance of ± 5-10 percent.
FUEL INPUT
RATING:
1.12 KG/H
(2.48 LB/H)
INDEX
K : BLACK
B: BLUE
W : WHITE
R : RED
LIGHT
Y : YELLOW
P : PURPLE
G : GREEN
O: ORANGE
26

ELECTRICAL WIRE DIAGRAM

LOCATE AND REMOVE
THE EIGHT SCREWS
OF ACCESS PANEL ON
UNDERSIDE OF UNIT
TO ACCESS HOPPER
COMPONENTS
CONTROLLER
AUGER MOTOR
& FEED SYSTEM
12V DC, 4.5 RPM
BLOWER FAN
12V DC
LOCATE AND REMOVE
THE TWO SCREWS
OF CONTROL PANEL ON
FRONT OF UNIT TO
ACCESS THE WIRES OF
THE COMPONENTS
AC/DC POWER
AC/DC ADAPTER
INPUT: 100~240V AC
OUTPUT: 12V DC
GROUND
GROUNDED
PLUG
GRILL
PROBE
IGNITER
12V DC, 45W