Sonesse 30 RS485 ORIGINAL INSTRUCTIONS These instructions apply to all Sonesse 30 RS485 drives, the different versions of which are available in the current catalogue. CONTENTS 1. Prior information................... 1.1. Field of application................1.2. Liability ....................2. Installation...................... 2.1. Assembly ....................
Any operation of the drive outside the field of application described above is prohibited. Such use, and any failure to comply with the instructions given in this guide and in the attached Safety instructions document, absolves Somfy of any liability and invalidates the warranty.
2] Clip the new cover on the head. 2.1.2.Preparing the drive CAUTION • Sonesse 30 RS485 : interior diameter of the tube has to be Ø27.7 mm or greater. • The crown is mandatory. 1] Fit the accessories required to integrate the drive into the tube: ð...
Page 7
• Light gap reduced: Do not pinch cable or be careful they are not in contact with moving parts. 2.1.6.Compatible power supplies (for US only) For USA and CANADA, use only SOMFY power supply listed in the leaflet. For other countries, see Compatibility Matrix document for appropriate power supply. References...
SETTING TOOL. NOTICE • For Weidmuller connection, use the setting cable ref 9019873. • The SDN Config Tool is available for download at https://www.somfy.com/ projects/downloads • When setting end limits, take care that the load bar remains free at upper end Limit.
Sonesse 30 RS485 NOTICE These instructions apply to all Sonesse 30 RS485 drive, the different versions of which are available in the current catalogue.. 2.3.Tips and advice on installation 2.3.1.Questions about the drive? Observations Possible causes Solutions The motorised "Power" or "datas" wiring are...
This drive does not require any maintenance operations. CAUTION • For the safety of goods and people, Somfy drives are equipped with thermal protection that will trigger the drive stops in the event of overheating. • Repeated activation of this protection can degrade drive performance.
Page 14
Philippe Geoffroy, Approval manager, acting on behalf of Activity director, Cluses, 01/2022. Somfy limited, Yeadon LS19 7ZA UK hereby declares that the drive covered by these instructions when marked for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with UK legislation of Machinery safety regulations S.I.2008 N°1597.