Specifi Cations - Mitsubishi Electric WD2000U User Manual

Mitsubishi wd2000u: user manual
Hide thumbs Also See for WD2000U:
Table of Contents

Advertisement

Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum
resolution
Computer/Component video input
Video input
Audio input
Monitor output
Audio output
Speaker
Control terminal / Others
Operating temperatures
Rated voltage
Power consumption
Dimensions (Not including protrusion)
Weight
Others
*1
: Wireless LAN unit isn't packaged together with the projector.
Replacement part
(Option / Not included in the box)
Spare lamp
DLP™ projector
WD2000
0.65-inch Single chip DMD
Pixel: 1280 x 768 = 983040 pixels
F 2.0 - 2.4 f= 24.5 - 33.1 mm
300 W
40" min. to 275" max. (Projection distance 1.4 to 10.6 m)
Computer signal
Maximum resolution: 1280 x 1024 dots (Analog) / compressed
Panel resolution: 1280 x 768 dots
Video signal
NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
Component
480i, 480p, 576i, 576p, 720p, 1080i
signal
Panel resolution: 1280 x 768 dots
[Signal type]
Analog RGB
Analog RGB
Digital RGB
[Signal type]
Video input
S-video input
[Signal type]
RGB/Component
Video
S-video
[Signal type]
Analog RGB
[Signal type]
RGB/Component
3 W Mono Round type ø5 cm
RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
+41°F (+5°C) to +104°F (+40°C)
AC100 - 240 V, 50/60 Hz
4.2 A
430 mm (W) x 166 mm (H) x 330 mm (D) (Projector only)
430 mm (W) x 166 mm (H) x 425 mm (D) (Including the terminal cover)
8.5 kg (Projector only), 8.8 kg (Including the terminal cover)
Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
S-video input
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Vp-p=1.0 V 75 Ω (negative sync)
Video input
Analog input
RGB: Vp-p=0.7 V 75 Ω (negative sync)
YC
C
B
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
DVI-D interface (TMDS single link) with HDCP
Digital input (DVI)
Audio input
350 mVrms, 10 kΩ or more
5 V 1.5 A (max) (For wireless LAN unit
DC OUT
(VLT-XD2000LP)
[Terminal type]
Mini D-SUB 15-pin
5 BNC
DVI
[Terminal type]
RCA / BNC
S / 2 BNC
[Terminal type]
Stereo mini jack (ø3.5)
RCA (L, R)
RCA (L, R)
[Terminal type]
Mini D-SUB 15-pin
[Terminal type]
Stereo mini jack (ø3.5)
x
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
R
[Line]
1
1
1
[Line]
1
1
[Line]
2
1
1
[Line]
1
[Line]
1
1
, C
B
R
)
*1
)
EN-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlp wd2000

Table of Contents