Table of Contents
Advertisement
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
opt.
XGA60
IMAGE
COLOR
AUTO
ENHANCER
CONTRAST
0
BRIGHTNESS
0
COLOR TEMP.
STANDARD
COLOR
0
TINT
0
SHARPNESS
0
1. IMAGE menu
ITEM
SETTING
COLOR ENHANCER
AUTO
PRESENTATION
STANDARD
THEATER
sRGB
USER
± 30
CONTRAST
± 30
BRIGHTNESS
COLOR TEMP.
4 options
± 10
COLOR
± 10
TINT
± 5
SHARPNESS
2. INSTALLATION menu
ITEM
SETTING
LAMP MODE
STANDARD
LOW
AUTO POWER ON
ON / OFF
AUTO POWER OFF
OFF / 5 - 60min
SPLASH SCREEN
ON / OFF
BACK COLOR
BLUE / BLACK
IMAGE REVERSE
OFF
MIRROR
INVERT
MIRROR INVERT
TEST PATTERN CROSS HATCH
ZOOM/FOCUS LOCK
ON / OFF
LENS SHIFT LOCK
ON / OFF
LENS SHIFT RESET
OK
•
Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
•
To cancel the test pattern, press any button.
2. INSTALLATION menu
opt.
XGA60
INSTALLATION
LAMP MODE
STANDARD
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
SPLASH
ON
ON
SCREEN
BACK COLOR
BLUE
IMAGE
OFF
REVERSE
CROSS HATCH
TEST PATTERN
ZOOM/FOCUS
OFF
LOCK
LENS SHIFT LOCK
OFF
LENS SHIFT
OK
RESET
FUNCTION
Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
Select to make the displayed image look bright and crisp.
Select to make the displayed image look natural.
This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
Select to give priority to the color reproducibility.
• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can't
be adjusted.
Select to set the gamma curve and BrilliantColor
Use to adjust the contrast of the projected image. (See page 25.)
Use to adjust the brightness of the projected image. (See page 25.)
Use to adjust the color temperature. (See page 26.)
Use to adjust the color thickness of the projected image. (See page 25.)
Use to adjust the color tint of the projected image. (See page 25.)
• When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted.
Use to adjust the sharpness of the projected image. (See page 25.)
FUNCTION
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
• When the lamp mode is switched, the projected image may fl icker. This is
not a product malfunction.
• Frequent switching of the lamp mode may damage the lamp.
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the remote
control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
Choose ON to display the splash screen when the power is turned on.
Use to change the color of the screen that appears when no signal is supplied.
Select when viewing images from the front with the projector installed on the
fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
Select when viewing images from the front with the projector installed on the
ceiling.
Use to show the test pattern of the crossing hatch.
Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
Use to enable or cancel the LENS SHIFT LOCK.
Use to reset the position of the lens to the factory setting.
3. FEATURE menu
opt.
XGA60
FEATURE
ASPECT
AUTO
PASSWORD
DISPLAY INPUT
FUNCTION
MENU POSITION
1.
CINEMA MODE
AUTO
?
VIDEO SIGNAL
AUTO
WXGA
WXGA
AUTO
SET UP
AUTO
SCART INPUT
OFF
A
LANGUAGE
English
Ë
OK
RESET ALL
TM
4. SIGNAL menu
opt.
XGA60
SIGNAL
HORIZ. POSITION
0
VERT.POSITION
0
FINE SYNC.
0
TRACKING
0
COMPUTER
RGB
INPUT
R G B
R G B
HOLD
OFF
USER
OK
as desired. (See page 26.)
EN-23
Advertisement
Table of Contents
