Table of Contents
Advertisement
Menu operation (continued)
3. FEATURE menu
ITEM
SETTING
ASPECT
AUTO
16:9
REAL
FULL
PASSWORD FUNCTION
MENU POSITION
2 options
CINEMA MODE
AUTO
VIDEO SIGNAL
8 options
WXGA
AUTO
1280 x 768 etc.
SET UP
AUTO
3.75% / 7.5%
SCART INPUT
ON / OFF
LANGUAGE
10 languages
RESET ALL
OK
• When WXGA in the FEATURE menu is set to other than OFF, it takes a little while to display images of WXGA and
XGA60 signals.
• Even if WXGA is set to AUTO, some images of WXGA signal may not be displayed correctly. See page 36 for details.
• When WXGA is set to other than AUTO and OFF, TRACKING isn't adjusted automatically. When wide strips ap-
pear, adjust TRACKING in the SIGNAL menu. (See page 27.)
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
4. SIGNAL menu
ITEM
SETTING
HORIZ. POSITION
0-999
VERT. POSITION
0-999
FINE SYNC.
TRACKING
0-9999
COMPUTER INPUT
AUTO
YC
C
B
HOLD
OFF / ON
USER
OK
CLAMP POSITION
CLAMP WIDTH
VERT.SYNC
AUTO / OFF
OVER SCAN
100%-90%
LPF
ON / OFF
SHUTTER (U)
SHUTTER (L)
SHUTTER (LS)
SHUTTER (RS)
EN-24
FUNCTION
Select to change the aspect ratio automatically depending on the input signal.
(Select this option for normal use.)
This option allows you to select the display position of squeezed (or horizontally
compressed) images stored on DVD discs. By pressing the ENTER button, you
can select the display position among CENTER, UPPER, and LOWER.
Select to project images in their original size as input. Not available when the
keystone adjustment is applied.
Select to project images in full size (1280 x 768 pixels) irrespective of type of
input signal.
Use to enable or cancel the password lock. See page 28 for details.
Use to change the position of the menu.
The fi lm mode will be automatically activated when a fi lm source signal is input.
OFF
The fi lm mode will not be activated.
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn't displayed correctly, select the
desired video format manually.
Use to detect WXGA signal automatically.
If WXGA signal isn't displayed correctly when AUTO is selected, select the
appropriate display size depending on the type of input signal.
OFF
When a signal other than WXGA is input, it may take abnormally long time to
display an image, or an image may not be displayed correctly. In such cases,
select OFF.
Select to change the SET UP mode automatically.
OFF
Select to make black lighter.
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
tion for U.S. Choose OFF when the image is dark.
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER/COMPONENT VIDEO IN-1 terminal.)
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
FUNCTION
Use to adjust the horizontal position of the projected image.
Use to adjust the vertical position of the projected image.
0-31
Use to eliminate fl ickering or blur, if appears, viewing the projected image.
Use to eliminate vertical wide stripes, if appears, viewing the projected image.
The proper setting is automatically selected.
RGB
Select this option if colors aren't displayed correctly when a high-defi nition video
device having R, G, and B outputs is connected.
/ YP
P
Select this option if colors aren't displayed correctly when 480p (525p) signal is
R
B
R
input from a DVD player having Y, C
or a high-defi nition digital tuner having Y, P
terminals.
Use to adjust the image when fl agging occurs near the top of the screen.
1-63
Use to correct solid white or solid black in the projected image.
1-63
Use to correct solid black in the projected image.
Use to adjust the image when its motion doesn't run smoothly. Select AUTO
for normal use.
Use to adjust the display area of projected image.
Use to select whether or not to enable the LPF.
0-38
Use to adjust the image when noise appears on the top part of the image.
0-38
Use to adjust the image when noise appears on the bottom part of the image.
0-63
Use to adjust the image when noise appears on the left half of the image.
0-63
Use to adjust the image when noise appears on the right half of the image.
, and C
component video output terminals
B
R
, and P
component video output
B
R
Advertisement
Table of Contents
