|
electricradiatorsdirect
Haverland RC Wave
Quick Start Guide
Scan here for full manual
Consult the full manual for advanced settings, warranty
details and programming instructions.
www.electricradiatorsdirect.co.uk/manuals/haverland/
Haverland-RC-Wave-V2-Manual.pdf
Set date & time
Select mode & temperature
- When you first turn the radiator on, it
will prompt you to set the time.
- Use
and
to select the current day.
Press
to confirm.
- Use
and
to select the current
- Press
hour. Press
to confirm.
- Press
- Use
and
to select the current
- Use
minutes. Press
to confirm.
(Manual) or "Prog" (Programming)
- Use
to switch on.
mode. Press
Manual mode
Radiator works to a constant set
temperature.
This icon displays
when unit is heating.
- Use
and
temperature.
Boost mode
This icon
displays when
unit is in
Boost mode.
- Hold down
2h
seconds to activate
Boost mode.
- The radiator will heat
at maximum power for
2 hours, overriding any
other mode selected.
Using the app
- Download the
AppStore (iOS) or Google Play (Android).
- Tap each hour to choose the heating
modes:
Eco = custom
Comfort = custom
- Select day to copy its program to other days.
- Choose your Comfort and Eco temperatures
at the bottom of the app.
Send to radiator
to enter menu.
- Press
on app. Long press
to enter Mode menu.
and
to choose either "Man"
- Press
then select your radiator.
- Press
to send your program to the radiator.
to select.
Program mode
Radiator follows schedule. You can adjust
the schedule in the Mode menu or app.
This icon
displays when
an override
temperature
is running.
Use
and
to set an
override
to adjust set
temperature.
Baby Care mode
Keypad lock
This icon
displays when
unit is in Baby
Care mode.
for 2
- Hold down
for 2
- Hold down
seconds to activate
for 2 seconds to lock the
Baby Care mode.
keypad.
- Once the keypad is
- The radiator will heat
at approximately half
locked, hold down
the wattage, keeping
and
unlock it.
the surface at a lower
temperature.
Haverland BT app
from
Haverland
app
Standby = no heat
Frost = 7°C
on radiator.
Please read all instructions carefully before use
This icon
• WARNING: In order to avoid overheating, do not cover the heater.
shows what
• WARNING: If the heater is to be installed in a bathroom, it must be positioned so
program mode
that it cannot be touched by anybody in the bath or shower.
is running:
• WARNING: If the mains power cable is damaged, it must be replaced by the
Comfort
manufacturer, with their after-sales service or similar qualified persons, in order to
prevent any danger.
Economy
• WARNING: Certain parts of this product can become very hot and cause burns.
Frost
Special attention shall be paid when children and other vulnerable persons are
Standby
present.
• CAUTION: Keep bags and other accessories well out of the reach of children.
You can adjust
program mode
• To disconnect mains power from the radiator, remove the plug from the wall
temperatures
socket; never pull on the cable.
in the Mode
• Do not leave the mains cable in contact with the radiator when it is switched on.
menu or app.
• During operation, the radiator must be kept well away from combustible
materials, such as curtains, carpets and furniture etc.
• The warranty does not cover any damage caused by not reading these
instructions.
• The installation should be carried out with consideration to the manufacturer's
instructions and in accordance with the relevant National Wiring Regulations
BS7671.
• It is very important that radiator has a good Electric Earth connection.
• The radiator shall be installed so that its mains plug is always accessible.
• The radiator must not be installed below or in front of a mains socket.
• This radiator cannot be surface mounted with a wall. Safety distances shall always
be respected.
This icon
displays when
• The radiator has a keyboard lock option to prevent children from changing the
unit keypad is
settings.
locked.
• This unit is not designed to be handled by persons (including children) with
physical, sensorial or mental handicaps, with little experience or knowledge,
unless they are under the supervision of an adult responsible for their safety with
the instructions on its use.
and
• Children shall always be supervised to ensure they do not play with the unit.
• Children under three shall be kept well away from the heater unless they are
continually supervised.
• Children between three and eight shall only switch the unit off or on providing it
for 2 seconds to
is positioned or installed in its final operating location and be supervised or have
received instructions on how to use the unit in a safe manner and understand the
risks involved.
• Children between three and eight shall not plug in, adjust or clean the heater or
carry out any maintenance operations.
• This unit may be used by children older than eight and by persons with physical,
sensorial or mental handicaps, with little experience or knowledge, provided they
have been duly trained and are supervised by an adult that understands the risks
Haverland
involved.
BT app
• Cleaning and maintenance shall be performed by adults not children. Children
must not play with the unit.
• Do not touch the external parts of the radiator when it is operating.
• It is quite normal that, with the first switch-on, the unit produces a "new" smell.
Allow your heater to operate in a well-ventilated place for two or three hours.
• Before the first switch on for the coming winter, the unit should be cleaned
(follow the steps given in the "maintenance section". This will prevent burning of
accumulated dust and other remains.
• This radiator CAN'T OPERATE with external programmable controllers or any other
exterior control device.
• The convection effect, together with other ambient factors, can cause discolouring
to metal surfaces and to plastics.
• Temperature differences can cause crackling and other noises in the unit. This
does not indicate any failure in the radiator.
• When the radiator is disposed of, the requirements established by current
legislation on waste processing and recycling shall be taken into account.
Safety Guidance
Need help?
Do you have a question about the RC Wave and is the answer not in the manual?
Questions and answers