Removing The Trim Plate; Installing The Supplied Gps Antenna - JVC KW-M785BW Instruction Manual

Installation and Connection Installation and Connection

Removing the trim plate

1
]
Remove the trim plate ( /
\
the two extraction keys (
] '
\
2
When the lower level is removed, remove
from the upper two catches of the trim
] '
plate ( / ).
The frame can be removed from the top side in the
same manner.
46 ENGLISH

Installing the supplied GPS antenna

GPS antenna is installed inside of the car. It should
'
) by inserting
be installed as horizontally as possible to allow easy
) as illustrated.
reception of the GPS satellite signals.
1
Clean your dashboard or other surface.
2
Remove the separator of the metal plate
Å
( ).
3
Press the metal plate (
on your dashboard or other mounting
surface.
You can bend the metal plate (Å) to conform to a
curved surface, if necessary.
4
Remove the separator of the GPS aerial
«
( ), and stick the aerial to the metal plate
Å
( ).
Å
) down firmly
«
Å
Notes on using the supplied GPS aerial («)
• Use the supplied GPS aerial («). Using the GPS aerial
other than the supplied one may cause a drop in
positioning accuracy.
• Depending on the type of car, reception of the GPS
satellite signals might not be possible with an inside
installation.
• Please install the supplied GPS aerial («) in an area
away from any aerials that are used with CB radios or
satellite televisions.
• The supplied GPS aerial («) should be installed at a
position that is spaced at least 30 cm from mobile
phone or other transmitting aerial. Signals from the
GPS satellite may be interfered with by these types of
communication.
• Painting the supplied GPS aerial («) with (metallic)
paint may cause a drop in performance.