Inserting Batteries In The Remote Control - Beko B32K 580 User Manual

CONNECTION/PREPARATION
Inserting batteries in the remote
control
1 Open the battery compartment by removing
the lid.
2 Insert the batteries (2 x 1.5 V micro; for
example R03 or AAA). Observe the polarity
(marked on the base of the battery compart-
ment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly
7
to remote control commands, the batter-
ies may be flat. Be sure to remove used
batteries.
The manufacturer accepts no liability for
7
damage resulting from used batteries
12 / 57 TR
-----------------------------------------------------
Environmental note
Make sure that the
7
exhausted batteries are
disposed in accordance
with the local laws and
regulations. The symbol on the battery and
package states that the battery supplied
with this product should not be considered
as a household waste. In some cases, this
symbol might be used together with a chemi-
cal symbol. If the batteries contain mercury
more than 0.0005% or lead more than
0.004%, a chemical symbol -Hg for mercury
and Pb for lead- will be placed under the
symbol. By ensuring proper disposal of
these batteries, you will have contributed in
prevention of potential hazards on the en-
vironment and human health that may arise
from inappropriate disposal of the batteries.
Television / User Manual