Table of Contents
Advertisement
CONNECTION/PREPARATION
Inserting batteries in the remote
control
1 Open the battery compartment by
removing the lid.
2 Insert the batteries (2 x 1.5 V micro;
for example R03 or AAA). Observe the
polarity (marked on the base of the
battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts
7
properly to remote control commands,
the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability
7
for damage resulting from used
batteries
- - ---------------------------------------------------
Environmental note
7
symbol on the battery and package
states that the battery supplied with
this product should not be considered
as a household waste. In some
cases, this symbol might be used
together with a chemical symbol. If
the batteries contain mercury more
than 0.0005% or lead more than
0.004%, a chemical symbol -Hg for
mercury and Pb for lead- will be placed
under the symbol. By ensuring proper
disposal of these batteries, you will
have contributed in prevention of
potential hazards on the environment
and human health that may arise from
inappropriate disposal of the batteries.
EN / 12
Make sure that the
exhausted batteries are
disposed in accordance
with the local laws
and regulations. The
Advertisement
Table of Contents
