Searching Television Channels With Satellite Signal - Beko B32K 580 User Manual

SETTINGS
Searching television channels
with satellite signal
1 In the »Tuning Setup« menu, select »Satel-
lite« from »Scan Type« using »
Tuning Setup
Tune Type
Scan type
Satellite
Scan Mode
Channel Type
Service Type
Back
MENU
2 Select the »Satellite« option using »
» « and select the satellite you want to
Λ
<
search with »
3 Select »Channel Type« using »
< >
Press » « or »
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scramble) or the both
(Free+Scramble).
Note:
If some of the frequencies are not stored
7
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Settings«
option to »Network«.
4 Select »Service Type« using »
< >
Press » « or »
to search for only television channels (DTV),
only radio (Radio) or the both (All).
18 / 57 TR
------------------------------------------------------------------------------------------------------------------
< >
« or »
DTV
Satellite
TURKSA...
Default
Free+Scramble
All
Start
ENTER
V
>
« or » «.
« or »
V
« to select whether you
« or »
V Λ
« to select whether you want
5 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
«.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
The search can be aborted with »EXIT«.
7
6 Press »EXIT« to end searching.
« or
«.
Λ
«.
Television / User Manual