Advertisement
Quick Links
1
Cinebird Camera Rickshaw Dolly Support
(RCSW-CNBD-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
2 x Handle Clamps
2 x 21'' Wheels
Cheese Plate
2 x Foot rest & Ratchet
Jockey Wheel Bracket
2 x Jockey Wheels
Seat
Handle Frame
2 x Foot rest
Brackets
3 x T-Type Allen key
Seat rod
2 x Side support Extension
2 x Wheel Brackets
(5mm, 5/16mm, 6mm)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PROAIM RCSW-CNBD-01
Summary of Contents for PROAIM RCSW-CNBD-01
- Page 1 Cinebird Camera Rickshaw Dolly Support (RCSW-CNBD-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Features of Rickshaw Dolly 21’’ Wheels with 360° Rotation with Break Easy Maneuvering & Stability Handle Frame Seat Easy of Movement handling Adjustable seat and rotates 360° Footrests & Ratchet Comfortable Long Hour Shooting Foot rest Brackets Adjustable Footrest with ratchet Side support Extension Handle attached with handle clamp Jockey Wheels...
- Page 3 Cinebird Camera Rickshaw Dolly Setup • Remove the seat mount adapter, mounted on the cheese plate, with the help of the Allen key, as shown in the image. • Multiple threads are provided on the Cheese Plate. Adjust and mount your seat adaptor anywhere on the platform as per your needs.
- Page 4 • The foot rest bracket is properly attached to the Cheese Plate. • Manually pull up the ratchet knob present on the Jockey Wheel bracket. • Match the Jockey Wheel bracket’s hole and then insert the Jockey Wheels, as shown in the image.
- Page 5 • Jockey Wheel bracket is properly attached to the Jockey Wheels. • Remove the bolts of the Handle Clamps using the Allen key. • Place the Clamp by matching it to the threads on the side of the Cheese Plate. •...
- Page 6 • Then place the Wheel Bracket by matching it to the threads on the side of the Cheese Plate. • After attaching the clamp to the Cheese Plate, insert the bolts from the bottom and tighten them with the Allen key. To attach the second Handle Clamp, repeat the same process.
- Page 7 • Follow the same above process to attach the 2nd Wheel. NOTE: The pneumatic wheels feature three height adjustment points, 5", 6" & 7", allowing the setup to adapt the height according to the rough and bumpy roads. • After attaching the wheel to the wheel bracket, insert the knob and secure it properly with the help of the Allen key.
- Page 8 • Similarly, following the same process tighten it properly with the second clamp's knob. • Loosen the side bolt of the center rod of the Handle Frame with the Allen key. • Then set the center rod position of the Handle Frame according to you and then tighten it properly with the Allen key.
- Page 9 • Match the thread holes of the Handle Clamp and Side Support Extension and then insert the bolts. • Properly tighten it with the help of the Allen key and align the Side Extension with the clamp. • After aligning the Side Extension, insert the bolt and then properly tighten it with the Allen key.
- Page 10 • Then mount the seat over the seat rod, as shown in the image. • Then properly secure the bolt at the bottom of the seat using the Allen key to properly secure the seat on the seat rod. • Adjust and properly lock the buckle of the seat strap and then tighten it, as shown in the image.
- Page 11 Bazooka & Offset Setup • Loosen the knob of the Euro adapter (Not Included), and then insert it by matching it with the hole of the cheese plate. • After inserting Euro Adapter (Not Included), re-tighten the knob of the adapter from the bottom part of the cheese plate.
- Page 12 • Loosen the castle ring of the Fluid Head (Not Included) and remove it. • Align the Fluid Head on the Offset Adapter and then insert it. • Re-tighten the castle ring at the bottom of the Fluid Head to properly secure it. •...
- Page 13 YOUR PROAIM CINEBIRD CAMERA RICKSHAW DOLLY SUPPORT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the RCSW-CNBD-01 and is the answer not in the manual?
Questions and answers