Advertisement
Table of Contents
(RS-1)Rail system
(RS-1)
INSTRUCTION MANUAL
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the Publisher.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PROAIM RS-1
Summary of Contents for PROAIM RS-1
- Page 1 (RS-1)Rail system (RS-1) INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by...
- Page 2 Its design prevents the camera from "twisting" on the rail support and raises the camera to the standard height. Proaim Rail Sys- tem is specifically designed to work for Follow Focus and long lenses. This Rail System comes with standard 15mm rods which are compatible with Arri and other accessories such as Follow Focus, Matte Box, etc.
- Page 3 Proaim (RS-1) Rail system Attach your top plate with your camera and tighten the screw properly. Then mount your camera onto the quick release plate and tighten the knob. knob PROAIM (RS-1) RAIL SYSTEM ALL DRESSED UP AND GOOD TO GO...
- Page 4 Proaim (RS-1) Rail system We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.
Need help?
Do you have a question about the RS-1 and is the answer not in the manual?
Questions and answers