Table of Contents
Advertisement
Changing the setting with a segment
bar
Some settings are represented by a bar
with seven segments. If all
of the segments are illuminated, the
maximum value is selected.
If none of the segments are illuminated
or if only one is, the minimum value is
selected or the setting is switched off
altogether (e.g. buzzers).
Touch the corresponding segment on
the segment bar to change the set-
ting.
Select
or
On
Off
on or off.
Confirm your selection with OK.
The setting is now saved. This will take
you back to the previous menu.
Entering letters
Letters are entered using a display key-
board. It is best to select short names.
Touch the desired letters or charac-
ters.
Tip: You can add a line break for longer
programme names using the symbol.
Touch
Save
.
The name is now saved.
to switch the setting
Using the appliance
Displaying the context menu
In some menus you can display a con-
text menu, e.g. to rename User pro-
grammes or to move entries un-
der
MyMiele
.
For example, touch a User pro-
gramme and keep your finger on it
until the context menu opens.
To close the context menu, touch an
area of the display located outside of
the menu window.
Moving entries
You can change the order of User pro-
grammes or entries under
For example, touch a User pro-
gramme and keep your finger on it
until the context menu opens.
Select
.
Move
Keep your finger on the highlighted
field and drag it to the desired loca-
tion.
.
MyMiele
29
Advertisement
Table of Contents
