Software Version; Legal Information; Showroom Programme; Factory Default - Miele DGC 7640 HC Pro Operating And Installation Instructions

Combination steam oven
Table of Contents

Advertisement

Software version

The software version is intended for the
Miele Customer Service Department.
You do not need this information for do-
mestic use.
 Confirm with OK.

Legal information

You can find an overview of the integ-
rated Open Source components under
Open source licences
 Confirm with OK.

Showroom programme

This function enables the combination
steam oven to be demonstrated in
showrooms without heating up. This
setting is not needed for domestic use.
Demo mode
If you have demo mode activated,
Demo mode switched on. The appliance
will not heat up
will appear when you
switch the combination steam oven
on.
-
On
Touch OK for at least 4 seconds to
activate demo mode.
-
Off
Touch OK for at least 4 seconds to
deactivate demo mode. You can use
the combination steam oven as nor-
mal.
.

Factory default

-
Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
-
User programmes
All User programmes will be deleted.
-
MyMiele
All MyMiele entries will be deleted.
-
Recommended temps.
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Settings
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

4002516626060

Table of Contents