HIKVISION iDS-TCS800-CI User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Digital Camera
  5. iDS-TCS800-CI
  6. User manual

HIKVISION iDS-TCS800-CI User Manual

All-rounder bi-spectrum incident detection traffic camera
Hide thumbs Also See for iDS-TCS800-CI:
Table of Contents

Advertisement

Quick Links

Download this manual
All-Rounder Bi-Spectrum Incident Detection
Traffic Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDS-TCS800-CI and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION iDS-TCS800-CI

Summary of Contents for HIKVISION iDS-TCS800-CI

  • Page 1 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual...
  • Page 2 With the philosophy of "Technology for the Good", Hikvision requests that every end user of video technology and video products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming to jointly create a better community.
  • Page 3 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security. Video products have made great contributions to the improvement of social security around the ●...
  • Page 4 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 5 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
  • Page 6 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...

  • Page 7: Table Of Contents

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Contents Chapter 1 Introduction ....................... 1 1.1 Product Introduction ......................1 1.2 Key Feature ..........................1 1.3 Running Environment ......................1 Chapter 2 Activation and Login ....................2 2.1 Activation ..........................2 2.1.1 Default Information ......................
  • Page 8 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 4.3.6 Set Vehicle Feature Parameters .................. 24 4.3.7 Set Image Encoding Parameters .................. 24 4.4 View Real-Time Picture ......................25 4.5 Search Picture ........................27 Chapter 5 Live View and Local Configuration ................28 5.1 Live View ..........................
  • Page 9 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 7.5 Set OSD ..........................43 Chapter 8 Network Configuration ..................... 44 8.1 Set IP Address ........................44 8.2 Connect to ISUP Platform ....................46 8.3 Set DDNS ..........................47 8.4 Set IEEE 802.1X ........................48 8.5 Set Image and Video Library ....................
  • Page 10 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 12.7 Synchronize Time ....................... 59 12.8 Set DST ..........................60 12.9 Debug ..........................60 12.9.1 Enable Information Overlay ..................60 12.9.2 Vehicle Capture and Recognition Service ..............60 12.9.3 Set Image Format ...................... 61 12.10 Export Parameters ......................

  • Page 11: Chapter 1 Introduction

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 1 Introduction 1.1 Product Introduction Based on deep-learning algorithm, the event enforcement traffic camera (hereinafter referred to as the device) can be used to detect real-time traffic events in city roads, expressways, tunnels, etc. 1.2 Key Feature Note Product features vary with different models.

  • Page 12: Chapter 2 Activation And Login

    Get the SADP software from the supplied disk or the official website ( http:// ● www.hikvision.com/ ), and install it according to the prompts. The device and the computer that runs the SADP tool should belong to the same network ●...

  • Page 13: Activate Via Web Browser

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 2-1 Activate via SADP Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same network segment as your computer by either modifying the IP address manually or checking Enable DHCP (Dynamic Host Configuration Protocol).

  • Page 14: Login

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 15: Chapter 3 Radar Detection

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 3 Radar Detection Radar is used to detect the target and link the capture. Set radar detection parameters before capturing vehicle pictures. Note The function varies with different models. The actual device prevails. 3.1 Set Detection Parameters Set radar detection parameters before capturing vehicle pictures.
  • Page 16 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 3) Set Vehicle Direction. Approaching Direction The vehicles are driven towards the construction position of the camera. Leaving Direction The vehicles are driven far away from the construction position of the camera. Bidirection There are vehicles driven both towards and far away from the construction position of the camera.

  • Page 17: Set Radar Calibration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual The lower the sensitivity is, the more sensitive the detection will be. For the detection which is too sensitive (e.g., some fixed facilities, such as the bus station on the lane, are detected as vehicles), you can adjust the sensitivity higher.

  • Page 18: Manual Calibration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Click Radar. 2. Click Coordinate Calibration or GPS Calibration. 3. Set the radar calibration. - Set coordinate calibration. Refer to Manual Calibration and Auto Calibration for details. - Set GPS calibration. Refer to GPS Coordinate Calibration for details. Note The supported calibration modes vary with different models.

  • Page 19: Auto Calibration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 1) Select Calibration Point. 2) Click Calibration. 3) Click the left button of the mouse to locate the vertexes of the calibration area on the live view image, and click the right button of the mouse to finish the drawing. Note The number of vertexes should be consistent with the selected number of Calibration Point.

  • Page 20: Gps Coordinate Calibration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 3-3 Auto Calibration 3. Draw the lane lines. 1) Select the lane sum. 2) Select the lane line No. 3) Click Draw Lane Line. The selected lane line will be displayed on the live view picture. 4) Drag the two end points of the line or drag the whole line to adjust its position according to the actual scene.

  • Page 21: Search Detected Vehicles

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Click GPS Calibration. Figure 3-4 GPS Coordinate Calibration 2. Enter the longitudes and latitudes of the two calibration points far away from the road middle line. 3. Enter the coordinates of the two calibration points. 4.
  • Page 22 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual - Search the vehicle first, and click Export to export the searched vehicle information to the computer. - Click Export directly to export the information of all the detected vehicles to the computer.

  • Page 23: Chapter 4 Vehicle Capture

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 4 Vehicle Capture Note The supported trigger modes vary with different models. The actual device prevails. 4.1 Set Event Detection The device supports capturing various traffic events. Steps 1. Go to Configuration → Device Configuration → Application Mode → Trigger Mode . 2.
  • Page 24 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Close Range Capture Check it and set Capture Interval. The device will track the target until one more picture is captured in close distance according to the capture interval. 6. Check the event(s) to be detected, and set the corresponding parameters. Note The supported events vary with different models.
  • Page 25 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Lowest Speed Limit The allowable minimal speed of the vehicle. Highest Speed Limit The allowable maximal speed of the vehicle. Driving Distance If a vehicle has changed a lane but is driven a distance shorter than the set driving distance on the lane, and then changes another lane, it is judged as continuous lane change.

  • Page 26: Set Data Collection

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-2 Draw Lane Lines and Areas 9. Click Save. 4.2 Set Data Collection You can set the vehicle data collection and analysis parameters. Steps 1. Go to Configuration → Device Configuration → Application Mode → Trigger Mode . 2.
  • Page 27 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-3 Set Data Collection 4. Select data upload mode. Upload Real-Time Data The vehicle detector will upload the collected data to the server in real time. Upload Statistics Data The vehicle detector will upload the collected data to the server according to the set interval. 5.

  • Page 28: Set Capture Parameters

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 5) Click Draw Virtual Coil A to draw the virtual coil area. Note Click the left button of the mouse to locate the vertexes of the virtual coil area on the live ●...

  • Page 29: Set Supplement Light Parameters

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-5 Set License Plate Recognition Parameters 2. Select License Plate Direction. - Select Front LPR when license plates of vehicles from the approaching direction need to be recognized. - Select Rear LPR when license plates of vehicles from the leaving direction need to be recognized.

  • Page 30: Set Picture Composition

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 3. Select I/O Output Mode. - Select Solid Light Mode when you need to use the solid light. - Select Housing Fan Mode when you need to use the fan. Note I/O output modes vary with different models. The actual device prevails. 4.

  • Page 31: Set Capture Overlay

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-7 Set Picture Composition 3. Set composition types for different picture quantities. 4. Set other composition parameters. Close-up Zooming Ratio The higher the value is, the larger the close-up is. Close-up Picture No. It is the picture where the close-up comes from.
  • Page 32 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-8 Set Capture Overlay 3. Set capture overlay parameters. Percentage It is the percentage that the overlaid information occupies on the picture. For example, if you set the percentage to 50, the overlaid information in a row will occupy up to half of the image width, and the excess content will be overlaid from a new line.

  • Page 33: Set Composite Picture Overlay

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Set Overlay Position If you check it, the current information will be displayed from a new line. Set Space Number Edit the number of spaces between the current information and the next one from 0 to 255. 0 means there is no space. Set Line Break Edit the number of characters from 0 to 100 between the current Characters...

  • Page 34: Set Vehicle Feature Parameters

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual It is the percentage that the overlaid information occupies on the picture. For example, if you set the percentage to 50, the overlaid information in a row will occupy up to half of the image width, and the excess content will be overlaid from a new line.

  • Page 35: View Real-Time Picture

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Go to Configuration → Device Configuration → Encoding and Storage → Image Encoding . Figure 4-10 Set Image Encoding Parameters 2. Select Capture Resolution. 3. Enter the picture size. JPEG Picture Size The size of the captured picture.
  • Page 36 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 4-11 Real-Time Picture 3. You can do the following operations on this interface. - Select the arming mode. Level 1 Arming can only connect one client or web. The uploaded pictures will not be stored in the storage card. The pictures in the storage card will be uploaded to the level 1 arming.

  • Page 37: Search Picture

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 4.5 Search Picture You can search the captured pictures stored in the storage card and export the pictures you need. Before You Start Install the storage card, and ensure the storage status is normal. Steps 1.

  • Page 38: Chapter 5 Live View And Local Configuration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 5 Live View and Local Configuration 5.1 Live View 5.1.1 Start/Stop Live View Click to start live view. Click to stop live view. 5.1.2 Select Image Display Mode Click to display the image in 4:3/16:9/self-adaptive display mode. 5.1.3 Select Stream Type Click to select the stream type.

  • Page 39: Enable Digital Zoom

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 5.1.6 Enable Digital Zoom You can enable digital zoom to zoom in a certain part of the live view image. Steps 1. Click to start live view. 2. Click to enable digital zoom. 3.
  • Page 40 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 5-1 Local Configuration Protocol Select the network transmission protocol according to the actual needs. Ensures complete delivery of streaming data and better video quality, yet the real-time transmission will be affected. Provides real-time audio and video streams.
  • Page 41 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual If you enable the feature information, information of the lane, traffic flow, speed, etc. will be displayed on the live view interface. Record File Size Select the packed size of the manually recorded video files. After the selection, the max. record file size is the value you selected.

  • Page 42: Chapter 6 Record And Capture

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 6 Record and Capture 6.1 Set Storage Path 6.1.1 Set Storage Card If you want to store the files to the storage card, make sure you insert and format the storage card in advance.

  • Page 43: Set Listening Host

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Go to Configuration → Device Configuration → Encoding and Storage → FTP . 2. Enable the FTP server. Figure 6-2 Set FTP 3. Optional: Check Upload Additional Information, and then the related information can be attached when uploading.

  • Page 44: Set Cloud Storage

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Before You Start The listening service has been enabled for the listening host, and the network communication with the device is normal. Steps 1. Go to Configuration → Device Configuration → System → Network Interface Parameters . Figure 6-3 Set Listening Host 2.

  • Page 45: Set Quota

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Go to Configuration → Device Configuration → Encoding and Storage → Cloud Storage . Figure 6-4 Set Cloud Storage 2. Check Enable. 3. Select Version. 4. Set the server parameters. 1) Enter Server IP Address and Port No.

  • Page 46: Set Record Schedule

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual What to do next Format the storage card after the settings. 6.3 Set Record Schedule Set record schedule to record video automatically during configured time periods. Before You Start Ensure the storage status is normal. You are recommended to set the video quota ratio as not 0. Steps 1.

  • Page 47: Chapter 7 Encoding And Display

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 7 Encoding and Display 7.1 Set Video Encoding Parameters Set video encoding parameters to adjust the live view and recording effect. When the network signal is good and the speed is fast, you can set high resolution and bitrate to ●...

  • Page 48: Set Image Parameters

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Image Quality When bitrate type is variable, 6 levels of image quality are selectable. The higher the image quality is, the higher requirements of the network bandwidth. Profile When you select H.264 or H.265 as video encoding, you can set the profile. Selectable profiles vary according to device models.
  • Page 49 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 7-1 Set General Parameters Figure 7-2 Set Video Image Parameters 2. Set the relevant parameters. Saturation It refers to the colorfulness of the image color. Sharpness...
  • Page 50 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual It refers to the edge contrast of the image. White Balance It is the white rendition function of the device used to adjust the color temperature according to the environment. The higher the White Balance Level is, the stronger the effect is. WDR Mode Wide Dynamic Range (WDR) can be used when there is a high contrast of the bright area and the dark area of the scene.

  • Page 51: Set Icr

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 2D DNR The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high, the image may become fuzzy. Enable Slow Shutter This function can be used in underexposure condition. It lengthens the shutter time to ensure full exposure.
  • Page 52 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 7-3 Set ROI 2. Select Stream Type. 3. Set ROI region. 1) Check Enable. 2) Select Area No. 3) Click Draw Area. 4) Drag the mouse on the live view image to draw a fixed area. 5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position.

  • Page 53: Set Osd

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 7.5 Set OSD You can customize OSD information on the live view. Steps 1. Go to Configuration → Device Configuration → Text Overlay → OSD Settings . Figure 7-4 Set OSD 2. Set the display mode, size, color, etc. Note The supported functions vary with different models.

  • Page 54: Chapter 8 Network Configuration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 8 Network Configuration 8.1 Set IP Address IP address must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.
  • Page 55 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual NIC Type Select a NIC (Network Interface Card) type according to your network condition. IP Address Two modes are available. DHCP The device automatically gets the IP parameters from the network if you check DHCP. The device IP address is changed after enabling the function.

  • Page 56: Connect To Isup Platform

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Enter Route Address and Subnet Mask if the device is connected to a router. It stands for domain name server. It is required if you need to visit the device with domain name.

  • Page 57: Set Ddns

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 6. Click Save. 7. Optional: View Registration Status. Note When the registration status shows online, you can add or manage the device via the platform software. Refer to its corresponding manual for details. 8.3 Set DDNS You can use the Dynamic DNS (DDNS) for network access.

  • Page 58: Set Ieee 802.1X

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual By Client Software Add domain name to the client software. Refer to the client software manual for specific adding methods. 8.4 Set IEEE 802.1X IEEE 802.1X is a port-based network access control. It enhances the security level of the LAN/ WLAN.

  • Page 59: Set Port

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps Note The function varies with different models. The actual device prevails. 1. Go to Configuration → Device Configuration → System → Image and Video Library . 2. Check Enable. 3. Set the parameters such as the device ID, user name, password, etc. Note The parameters should be consistent with those on the image and video library platform.
  • Page 60 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual It refers to the port of real-time streaming protocol. SDK Port It refers to the port through which the client adds the device. SADP Port It refers to the port through which the SADP software searches the device. Note After editing the port, access to the device via new port.

  • Page 61: Chapter 9 Serial Port Configuration

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 9 Serial Port Configuration 9.1 Set RS-485 Set RS-485 parameters if the device needs to be connected to other peripheral devices controlled by RS-485 serial port. Before You Start The corresponding device has been connected via the RS-485 serial port. Steps Note The supported parameters may vary with different models.
  • Page 62 All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Figure 9-2 Set RS-232 3. Set Baud Rate, Data Bit, Stop Bit, etc. Note The parameters should be same with those of the connected device. 4. Select Working Mode. Console Select it when you need to debug the device via RS-232 serial port. Transparent Channel Select it, and the network command can be transmitted to RS-232 control command via the RS-232 serial port.

  • Page 63: Chapter 10 Exception Alarm

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 10 Exception Alarm Set exception alarm when the network is disconnected, the IP address is conflicted, etc. Steps Note The supported exception types vary with different models. The actual device prevails. 1.

  • Page 64: Chapter 11 Safety Management

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 11 Safety Management 11.1 Manage User The administrator can add, modify, or delete other accounts, and grant different permissions to different user levels. Steps 1. Go to Configuration → Device Configuration → User Management . 2.

  • Page 65: Set Https

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 3. Click Save. Result When the times you entered incorrect passwords have reached the limit, the current IP address will be locked automatically. 11.3 Set HTTPS 11.3.1 Create and Install Self-signed Certificate HTTPS is a network protocol that enables encrypted transmission and identity authentication, which improves the security of remote access.

  • Page 66: Set Ssh

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 11.4 Set SSH To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Steps 1. Go to Configuration → Device Configuration → System → Service . 2.

  • Page 67: Chapter 12 Maintenance

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Chapter 12 Maintenance 12.1 View Device Information Basic Information and Algorithms Library Version Go to Configuration → Device Configuration → System → Device Information to view the basic information and algorithms library version of the device. You can edit Device Name and Device No.

  • Page 68: Search Log

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 12.3.2 Search Log Log helps to locate and troubleshoot problems. Steps 1. Click Log. 2. Set search conditions. 3. Click Search. The matched log files will be displayed on the log list. 4.

  • Page 69: Restore Parameters

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 12.6 Restore Parameters When the device is abnormal caused by the incorrect set parameters, you can restore the parameters. Steps 1. Go to Configuration → Device Configuration → System Maintenance → Default . 2.

  • Page 70: Set Dst

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Note The time synchronization modes vary with different models. The actual device prevails. 4. Click Save. 12.8 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.

  • Page 71: Set Image Format

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Steps 1. Go to Configuration → Device Configuration → Advanced Settings → Vehicle Capture and Recognition Service . 2. Check the service(s) according to your needs. Note The supported services vary with different models. The actual device prevails. Not Capture No Plate Vehicle The vehicles without license plates will not be captured.

  • Page 72: Import Configuration File

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual 3. Set a password, and click OK. Note The password is used for importing the configuration file of the current device to other devices. 4. Select the saving path, and enter the file name. 5.

  • Page 73: Appendix A. Communication Matrix And Device Command

    All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual Appendix A. Communication Matrix and Device Command Scan the QR code below to get the communication matrix of the device. Scan the QR code below to get the device command.
  • Page 74 UD28193B...

Table of Contents