Advertisement
Use Instructions
⚫
Fit the HEPA filter (8) on the motor base as the picture shows, and buckle the head unit onto the
tank. The filter should be taken out and cleaned after every heavy use.
⚫
Connect one end of the metal hose (7), or the aluminum nozzle (10) with the suction port (1) on tank
tightly.
⚫
Switch on: set the switch (2) to " I "
⚫
Switch off: set the switch (2) to "O"
⚫
Put the aluminum nozzle (10) into a fireplace or stove to vacuum ash.
⚫
Move the aluminum nozzle with light pressure slowly and evenly over the ash.
Maintenance and Cleaning
⚫
Stop the cleaner.
⚫
Disconnect the mains plug from the power supply.
⚫
Disconnect hose, tube and container.
⚫
Clean metal hose connectors, metal hose and tube after use, and keep them unblocked.
⚫
Use a damp cloth to clean the plastic parts.
⚫
Empty the dust container, and if necessary, wash it.
⚫
Clean the dust on filter (8) with brush, and if necessary, wash it.
⚫
Do not use cleaning products, solvents or sharp objects for this purpose.
Repairment
3
4
6
5
8
9
7
10
4/5
Advertisement
