Specifications - Mitsubishi E85LCD-BK User Manual

Monitor

Specifications

Diagonal:
LCD Module
Viewable Image Size:
Native Resolution (Pixel Count):
Video:
Input Signal
Sync:
Analog input:
Display Colors
Horizontal:
Synchronization
Vertical:
Range
Resolutions Supported Landscape:
Active Display Area Horiz. :
Vert. :
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Storage Temperature:
Humidity:
* 1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
Mitsubishi E85LCD-BK
Monitor
18.1 inch
18.1 inch
1280x1024
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7p-p and Sync Negative 0.3V p-p)
16,777,216
31.0 kHz to 82 kHz
55.0 Hz to 85 Hz
720 x 400* :VGA text
1
640 x 480* 1 at 60 Hz to 85 Hz
800 x 600* at 56 Hz to 85 Hz
1
832 x 624* 1 at 75 Hz
1024 x 768* at 60 Hz to 85 Hz
1
1152 x 870* 1 at 75Hz
1280 x 1024 at 60 Hz to 75 Hz ................. optimal display performance.
359 mm/14.1 inches
287 mm/11.3 inches
AC 100 -
120 V/ 220-240 V
0.8 A @ 100–120 V, 0.4 A @ 220-240 V
398 mm (W) x 436 mm (H) x 215 mm (D)
15.7 inches (W) x 17.2 inches (H) x 8.5 inches (D)
8.6 kg
19.0 lbs
5°C to 35°C/41°F to 95°F
30% to 80%
Feet: 0 to 12,000 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
Feet: 0 to 53,300 Feet
11
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.28 mm dot
pitch; 200cd/m white luminence;
2
350:1 contrast ratio, typical
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
NEC-Mitsubishi Electronics Display cites
recommended resolution at 60 Hz for
@ 50/60 Hz