Table of Contents
Advertisement
3.1 Set Point (Default=25° C)
The Set Point is the temperature you desire to have. The Default Set Point is 25° C.
How to display the chosen Set Point
Press the Arrow Up button and then the S button. After 5 seconds the display will show
again the ambient temperature.
How to change the Set Point
With the panel (with quick choice)
Press the Arrow Up button > [SET] > Press the S button > Press the Arrow Up or the
Arrow Down button to select the desired temperature > Press the S button to record it
With the remote-control device
Press the button + to increase the Set Point.
Press the button - to decrease the Set Point.
3.2 Functioning Modes (Default=A)
A=Auto Mode
C=Cool Mode
H=Heat Mode
U=Unattended Mode
D=Dehumidify
FO=Fan Only
See chapter 4 for a more precise analysis of the functioning modes.
3.3 Fan Mode (Default=A)
A=Auto; 1-2-3-4 indicate the chosen speed.
See chapter 5 for a more precise analysis of the functioning modes.
3 - SETTING OUT
Pag.
6
Advertisement
Table of Contents
