Table of Contents
Advertisement
11.1 When the display is off
Check the powerboard supply to the unit. Check the good functioning of the connec-
tion cable plug both from the powerboard side and from the panel side.
If the powerboard is correctly supplied (the warning lights are blinking) and the cable
is unblemished and correctly inserted, call the assistance service for a more precise
control.
11.2 Display shows [nPr]
The powerboard has not correctly been set out or the CHANGE OVER is not connec-
ted. See 1.3 to set out the dip switch.
11.3 Display shows [NA]
It means that the demanded function is not available for the set out functioning. Check
that parameters are correct. See also 7.5.
11 - TROUBLE SHOOTING
Pag.
21
Advertisement
Table of Contents
