Table of Contents
Advertisement
IMPORTANT
Check that the program downloaded for Vega MK II corresponds to the unit type
actually connected to.
1.5 Positioning of the panel (Temperature internal probe)
Since the temperature probe installed in the panel feels the ambient temperature, the
panel should NOT be installed:
1) Directly exposed to the sunlight (for example, in front of a window);
2) In air stagnation areas (for example, between many pieces of furniture or behind
doors);
3) In areas next to heat springs (for example, near incandescent lamps)
In case of anomalies during the functioning due to the panel position, you have to use
the external probe (see 1.6), that replaces the probe in the panel.
1.6 Temperature external probe (as option)
External probe (code MSENS)
The external probe must be connected to the RJ12 connector "Probe" on the power-
board in the electrical box. The connection to the external probe excludes automati-
cally the internal probe. It is better to fasten the sensitive bulb of this probe on the con-
ditioner or the fan coil suction.
1 - INSTALLATION
Pag.
2
Advertisement
Table of Contents
