Installation Summary; Grounding Considerations - Allen-Bradley DeviceNet 1756-DNB Installation Instructions Manual

ATTENTION: This equipment is not resistant to sunlight or other sources of UV radiation.
ATTENTION: Prevent Electrostatic Discharge
This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation.
Follow these guidelines when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in use.

Installation Summary

To install a communication module in a 1756 ControlLogix chassis, complete
these steps.
1. Determine Module Slot
Set the Communication
2.
Set the Node
3.
Install the Module.
4.
Connect the Module to a DeviceNet
5.
Download the Add-on
6.
7. Connect to the Module via the USB
8. Apply Chassis Power and Check Status

Grounding Considerations

Refer to these publications for grounding guidelines:
• DeviceNet Media Design and Installation Guide, publication
DNET-UM072
• Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Rockwell Automation Publication DNET-IN001B-EN-P - January 2012
Install a 1756 DeviceNet Communication Module
Location.
Rate.
Address.
Network.
Profile.
Port.
Indicators.
Chapter 1
11