Setting Frequency; Auto Power-Off; Warning Signs And Icons; Memory Full - Minox DCC Rolleiflex 5.0 Owner's Manual

Hide thumbs Also See for DCC Rolleiflex 5.0:
Table of Contents

Advertisement

Available languages

Available languages

Setting frequency (for fl uorescent lamp)
Left button (reverse)

Auto power-off

The camera, when left without operation for longer than 60sec, automatically activates
Auto power-off circuitry to turn power off.
Press Power switch again to resume operation.
44
While the camera is in Record
mode, press Left button to select
frequency for shooting under fl uo-
rescent lamp(s). 50 Hz and 60 Hz
alternately appears on the monitor
for selection.
Caution
* This is to prevent the fl ickering of
light under fl uorescent lamp(s).
Except for high-frequency fl uores-
cent lamp(s), stripes may appear
across images captured under
normal fl uorescent lamp(s) at the
incompatible frequency. Even set
at the correct frequency, stripes
may appear under strong fl uores-
cent lighting.

Warning signs and icons

Warning signs:

Memory Full

When a memory card is used up and
shutter release button is pressed,
MEMORY FULL sign will appear.
To continue shooting, deletion of
partial or all images on the card will
be necessary. Otherwise, replace
memory card with new one.
Warning signs:

No Card

When a mini SD memory card is not
loaded, the situation is indicated in
this way, and the power is turned
off automatically.
45

Advertisement

Table of Contents
loading

Table of Contents