Table of Contents
Advertisement
Chapter 6. DTE Port Configuration
1 PROTOCOL
2 PHYSICAL LAYER OPTIONS 1 INTERFACE TYPE
3 PROTOCOL OPTIONS
4 ADDRESS TABLE
The Express 5200 buffers async characters from the DTE device
until two idle characters or 100 characters are received. A frame
relay synchronous frame is constructed containing the data content
of each character. Frame relay frames received on the network
containing transparent async data are transmitted to the attached
device with the character format set under the DTE port physical
layer options.
No control lead status or break characters are transmitted across
the frame relay network.
Physical Layer Options (PHYS LYR OPTS)
Interface Type (INTERFACE)
Select the connector type for the
EIA-232 and V.35 .
6-18
6 TRANSPARENT ASYNC
2 BIT RATE
3 DATA BITS
4 PARITY
5 STOP BITS
6 HARDWARE FLOW CONTROL 1 OFF
1 FRAME SIZE
2 MAX IDLE COUNT
1 FAR END PORT NUMBER
2 OUTGOING DLCI
Figure 6-8. Transparent Async Protocol Menu Tree
Express 5200 User Manual
1 EIA 232
2 V.35
1 7
2 8
1 NONE
2 EVEN
3 ODD
2 ON
1 DTE PORT 1
2 DTE PORT 2
interface. The choices are
DTE
1 2400 bps
2 4800 bps
3 9600 bps
4 19.2 Kbps
5 38.4 Kbps
6 57.6 Kbps
1 1
2 2
61202175L1-1
Advertisement
Table of Contents
