Chapter 10. IP Routing
In addition to RIP, the network port uses inverse ARP (RFC 1490) to
associate peer router/FRAD IP addresses to PVC addresses.
The Express 5200 can also respond to requests from peer routers/
FRADs seeking an association for their tables. The transmit and
receive inverse ARP section can be independently enabled.
Access IP Routing selections by first choosing 1 C
from the M
C
ONFIGURATION
the screen in Figure 10-1 will appear. Figure 10-2 shows the front
panel IP R
.
.
10-2
menu. Then choose IP R
AIN
menu. When using the VT 100 terminal interface,
menu tree.
OUTING
Figure 10-1. VT 100 IP Route Menu
Express 5200 User Manual
ONFIGURATION
from the
OUTING
61202175L1-1