Table of Contents
Advertisement
Chapter 12. Statistics
Rcv Overrun
Port Unavailable
Inv Formats
Unknown DLCI
Aborts Rcv
Breaks Rcv
Frame Errors
DCD Loss
Buffer Unavailable
Invalid DLCI
Inactive DLCI
Signal Statistics
This status information applies when the DTE port is configured
for F
information.
Tx Signal Frame
12-4
Receive FIFO (first in first out) overrun. Exter-
nal clock for network port is too fast.
Frames received destined for an inactive
port.
Frames received with invalid encapsulation
code points.
All frames received with a DLCI address not
already defined by the Express 5200.
Frames received with abort sequence of sev-
en ones (not available when T
A
SYNC
Async break characters received (only avail-
able when T
selected).
Frames received which are violating maxi-
mum frame size or are not octet-aligned.
Frames received with DCD falling before the
end of the frame.
Number of packets received without any
buffers available, indicating a congested sit-
uation. Verify H
enabled.
Frames received on invalid DLCI.
Frames received on inactive DLCI.
R
protocol or when viewing N
RAME
ELAY
Total signaling frames transmitted (polls
or responses).
Express 5200 User Manual
protocol is selected).
A
RANSPARENT
SYNC
F
ARDWARE
LOW
ETWORK
RANSPARENT
protocol is
is
C
ONTROL
S
TATISTICS
61202175L1-1
Advertisement
Table of Contents
