ADTRAN Express 5200 User Manual page 162

Frame relay service unit
Table of Contents

Advertisement

Appendix D.Glossary
end device. Bridges are generally used to connect LAN segments to other LAN
segments or to a WAN. They route traffic on the Level 2 LAN protocol (e.g. the
Media Access Control address), which occupies the lower sub-layer of the LAN
OSI data link layer. See also router.
CCITT
Consultive Committee for International Telephony and Telegraphy. A standards
organization that devises and proposes recommendations for international com-
munications. See also American National Standards Institute (ANSI).
CD
carrier detect. A signal generated by a modem or DSU/CSU. CD indicates the
presence of a carrier signal on a communications link.
channel service unit
CSU. A device used to connect a digital phone line (T1 or Switched 56 line) com-
ing in from the phone company to either a multiplexer, channel bank, or directly
to another device producing a digital signal; for example, a digital PBX, a PC, or
data communications device. A CSU performs certain line-conditioning and
equalization functions, and responds to loopback commands sent from the cen-
tral office. A CSU regenerates digital signals. It monitors them for problems,
and provides a way of testing the digital circuit.
clocking
An oscillator-generated signal that provides a timing reference for a transmis-
sion link. A clock provides signals used in a transmission system to control the
timing of certain functions. The clock has two functions, (1) to generate periodic
signals for synchronization and (2) to provide a time base.
CPE
Customer premise equipment. All telecommunications terminal equipment
located on the customer premises, including telephone sets, private branch
exchanges (PBXs), data terminals, and customer-owned coin-operated tele-
phones.
CRC
Cyclic redundancy check. A computational means to ensure the accuracy of
frames transmitted between devices in a frame relay network. The mathematical
function is computed, before the frame is transmitted, at the originating device.
Its numerical value is computed based on the content of the frame. This value is
D-2
Express 5200 User Manual
61202175L1-1

Advertisement

Table of Contents
loading

Table of Contents