Advertisement
Installation
Removing the Right Baffle for
Side Discharge Cutting
1.
Thoroughly clean the mower.
2.
Remove the locknuts and Bellville washers from
the right side baffle (Fig. 5).
Note:
Only the right side baffle needs to be
removed for side discharge mowing.
Note:
Save the hardware for use when
reinstalling the baffle.
3.
Lift the baffle and slide it out of the interlock
with the left side baffle.
4.
For safety, install the previously removed bolts,
washers and locknuts into the open holes of the
mower, wherever hardware was removed.
POTENTIAL HAZARD
Open holes in the mower expose you and
others to thrown debris.
WHAT CAN HAPPEN
Debris thrown out of holes in the mower
can cause injury.
HOW TO AVOID THE HAZARD
Never operate the mower without hardware
mounted in all holes in the mower.
Install hardware in mounting holes when
the baffle is removed.
4
Advertisement
