Advertisement
Installation
Installing the Kickers
Place spacers and kickers inside the mower, over the
holes provided (Fig. 1). Remove any hardware
installed in these holes and save for reinstallation if
the kickers are removed. Secure the kickers with (4)
5/16–18 x 3/4" (19 mm) carriage bolts, (through from
the top side of the mower) and (4) 5/16" locknuts
(Fig. 1).
.
1
Figure 1
1. Kicker
2. Spacer
2
3
2
2034
4
3. Bolt 5/16–18 x 3/4"
(19mm)
4. Locknut 5/16" (7.9mm)
Installing the High-lift Blades
1.
Remove standard blades (Fig. 2).
2.
Holding the blade end using a rag or thickly
padded glove, install each high–lift blade,
Belleville washer (concave side toward the
blade) and the blade bolt (Fig. 2).
IMPORTANT: The sail (curved part of the
blade) must be pointing toward the top of the
mower to ensure proper cutting.
3.
Tighten the blade bolt to the torque specified in
the Mower Operator's Manual.
4
2
1
Figure 2
1. Blade bolt
2. Belleville
washer—concave side
toward blade
3
5
1796
3. Blade
4. Spindle
5. Sail
Advertisement
