Advertisement
STEP 13
Assemble and Install Coop Doors
13.1 Assemble the frame from the pressure-treated lumber with cross section 1 1/2" x 2 1/2 "
with 2x5" wood screws according to the drawing.
13.2 Install door trims from the pressure-treated lumber with cross section 1 1/2" x 3/4" with
2" wood screws according to the drawing.
13.3 Prepare and install starter courcer from the pressure-treated lumber with cross section
1/4" x 3/4".
13.4 Prepare the 1/2" x 6" wood siding boards in the required amount according to the drawing.
13.5 Assemble siding shields with 2" galvanized nails.
13.6 Install three 3" door hinges using 2x1" wood screws. Finish the door installation by
attaching 4" surface bolt and 6" door pulls (see nodes U,V,T).
U
V
T
Advertisement
