External Touch Display (Etd) Connection - S&P SLIM Series Manual

14.1. EXTERNAL TOUCH DISPLAY (ETD) CONNECTION

The ETD must be connected to the controller with a 4 wires shielded twisted-wire pair cable of 100 m max length. Deli-
vered with the unit cable of 10 m length. 4P4C connector is reserved for ETD. Inside the electrical cabinet there are two
controllers. Find how to connect the ETD here:
CONTROLLER 2
The ETD has an electrical protection IP-20 degree, so it is reserved exclusively for an indoor usage sheltered from mois-
ture. The ETD is delivered within a wall fixation support, find the fixation support dimensions below:
TCP/IP
4 x ø5 mm
25 mm
140 mm
B
A
N
+24V
Ext.
Disp.
CONTROLLER 1
40 mm 90 mm
Brown (4)
Yellow (3)
White (2)
Black (1)
TCP/IP
21