Filter Replacement; Removing The Filter Through The Bottom; Removing The Filter Through The Lateral - S&P SLIM Series Manual

10. FILTER REPLACEMENT

The heat recovery unit is supplied within a F7 (ePM1 50%) filter in the supply side and M5 (ePM10 50%) filter in the ex-
tract side. There is no possibility to mount a second filter inside the unit.
The supplied filters can be removed both from bottom (1) and side (2):

10.1. REMOVING THE FILTER THROUGH THE BOTTOM

a) Open the specific hinged panel for
filter replacement.
c) Remove the filtration box.

10.2. REMOVING THE FILTER THROUGH THE LATERAL

a) Remove the specific panel for filter
replacement.
c) Remove the filter. The filtration box remains inside the unit.
14
b) Push from the fixation pieces to loose the filtration box.
d) Remove the filter from the filtration box: first step is to push from the pie-
ces that fix the filter to the box. Then, the filter will be liberated.
Do not threw the filtration box away, you will
need it to put the spare filter inside the unit.
b) Push from the fixation pieces.