Using The Rechargeable Battery - ALDI Ferrex FABH 20-I1 WU5420403 User Manual

First use
5. Rotate the quick-action drill chuck clockwise until you can insert the desired drill
bit adapter or screwdriver bit (not included in package contents).
6. Insert the desired screwdriver bit or the drill bit adapter with the appropriate
insertion depth into the quick-action drill chuck.
7. Rotate the quick-action drill chuck anticlockwise until the screwdriver bit or the
drill bit adapter is clamped firmly in place.
8. After the work: Make sure that the product has stopped moving, and lock the On/Off
switch by pushing the switch (right-hand/left-hand rotation) to the middle position.
9. Remove the rechargeable battery from the product.
10. If necessary, pull the screwdriver bit out of the drill bit adapter.
11. Rotate the quick-action drill chuck anticlockwise until you can pull out the
screwdriver bit or the drill bit adapter from the quick-action drill chuck.
12. Pull the locking mechanism of the SDS-Plus shank holder on the product as far
back as possible in order to pull out the quick-action drill chuck from the SDS-Plus
shank holder.

Using the rechargeable battery

WARNING!
Risk of injury!
Incorrect use of the rechargeable battery and charger can cause injury.
− This product does not come supplied with a battery.
Use only the rechargeable batteries specified in the chapter 'Technical
data' for the product. Do not operate the product with rechargeable
batteries from other manufacturers.
− Read and follow the instructions in the user manual for the battery pack
and charger used.
Charging the rechargeable battery
− To charge the battery, follow the instructions described in the user manual for the
battery pack and charger used.
Inserting and removing the battery
− To insert the rechargeable battery, slide it into the battery holder
The battery audibly locks into place.
− To remove the rechargeable battery, press the battery-release button and pull
the rechargeable battery out of the battery holder.
16
7
(see Fig. A).