ALDI Ferrex FABH 20-I1 WU5420403 User Manual page 25

Noise emission values in accordance with EN 62841-2-1:
• Sound pressure level L
• Sound power level L
• Uncertainty K:
The aforementioned values are noise emission values and therefore do not necessarily
represent safe values for the workplace. The correlation between emission and emission
levels cannot reliably provide for a conclusion as to whether additional cautionary
measures are necessary or not.
Factors that could affect the respective immission level at the workplace involve the
specification of the work area, the surrounding area, the duration of exposure, other
noise sources, etc.
You must also observe any divergences in national regulations with respect to the
permissible workplace levels. The aforementioned information does, however, allow
the user to better assess dangers and risks.
Vibration for rotary hammers:
• Hammer drilling a
• Uncertainty K:
Vibration for drills:
• Drilling into metal a
• Uncertainty K:
WARNING!
The aforementioned vibration emission level (vibration value) has been measured in
accordance with a test method standardised in DIN EN 62841-1 or DIN EN 62841-2-1 and
DIN EN IEC 62841-2-6, and can be used to compare one power tool to another. It is also
suited for preliminary estimation of loading by vibration. The actual vibration emission
value can, as described below, differ by type of application:
• Condition of the product and proper maintenance respectively,
• The type of material and use of the product,
• Use of the right accessories and whether they are in good condition;
• A firm grip on the product by the user,
• Proper use of the product as described in this user manual.
Any improper use of the product can cause vibration-related ailments.
: 75.5 dB(A)
pA
: 86.5 dB(A)
wA
5.0 dB(A)
: 6.766 m/s²
h, HD
1.5 m/s²
: 3.65 m/s²
h, D
1.5 m/s²
Noise/vibration information
25