Table of Contents
Advertisement
MINI-LINK PT 2010 is a stand-alone product integrating the system platform
providing traffic and system control, with microwave transmission from 8 to
406 Mbps.
MINI-LINK PT 2010 operates within the 6 to 42 GHz frequency bands, using
4, 16, 32, 64, 128, 256, and 512 QAM modulation schemes, also supporting
Hitless Adaptive Modulation.
MINI-LINK PT 2010 is an all-outdoor system. It is connected with a DC supply
voltage and an optical fiber cable.
For dual MINI-LINK PT 2010 installation systems, two Packet Terminals and
one or two antennas are used. When using one antenna, the two Packet
Terminals are connected to the antenna using a power splitter.
The Packet Terminal and the antenna are easily installed on a wide range of
support structures. The Packet Terminal is fitted directly to the antenna as
standard, integrated installation. The Packet Terminal and the antenna can
also be fitted separately and connected by a flexible waveguide. In all cases,
the antenna is easily aligned and the Packet Terminal can be disconnected and
replaced without affecting the antenna alignment.
The Packet Terminal is described in Section 8.1 on page 32.
The antennas are described in Section 8.2 on page 34.
1+0 terminal
integrated installation
Figure 3
MINI-LINK PT 2010s and Antennas in Different Installation Alternatives
1/221 02-CSH 109 172/1-V1 Uen E | 2012-11-07
1+0 terminal
separate installation
System Overview
Dual installation with
integrated power splitter
15503
5
Advertisement
Table of Contents
