Table of Contents
Advertisement
The transmitter can be turned on or off from the management system.
Figure 5
5.2.1
RTPC Mode
In RTPC mode the transmit power (P
a maximum level (P
5.2.2
ATPC Mode
ATPC is used to automatically adjust the transmit power (P
maintain the received input level at the far-end terminal at a target value. The
received input level is compared with the target value, a deviation is calculated
and sent to the near-end terminal to be used as input for possible adjustment
of the transmit power. ATPC varies the transmit power, between a selected
maximum level (P
1/221 02-CSH 109 172/1-V1 Uen E | 2012-11-07
Transmit power
P
max
P
fix min
P
ATPC min
Transmit Power Control
). The desired value (P
max
) and a hardware specific minimum level (P
ATPC max
MINI-LINK PT 2010 Functions – Radio Link
P
ATPC max
P
P
set
out
RTPC mode
ATPC mode
) ranges from a minimum level (P
out
) can be set in 1 dB increments.
set
P
out
5647
) to
fix min
) in order to
out
).
ATPC min
11
Advertisement
Table of Contents
