Table of Contents
Advertisement
Bandwidth utilization
Delay measurement
Packet counters
6.4
Delay
Delay performance per link for priority traffic is <0.8 ms for Radio Link capacities
below 50 Mbps and <0.5 ms for Radio Link capacities above 50 Mbps. Delay
variation for priority traffic is <0.5 ms per link.
7
MINI-LINK PT 2010 Functions –
Synchronization
7.1
Overview
MINI-LINK PT 2010 is by default working in Free Running mode. In this mode
the node is not a part of the synchronization network, and does not maintain
a SEC.
MINI-LINK PT 2010 can also be configured to Network Synchronized mode
where the node maintains a SEC and distributes synchronization and
synchronization quality level status according to ITU-T G.8261, G.8262, and
G.8264.
7.1.1
Network Synchronized Mode
With Network Synchronized mode it is possible to build a synchronized network
where all the NEs are synchronized to the same source. Figure 18 shows an
example of a network where the synchronization information is carried to all the
NEs through an assigned path. In case of link failures the synchronization may
be reestablished using the unassigned synchronization paths.
1/221 02-CSH 109 172/1-V1 Uen E | 2012-11-07
MINI-LINK PT 2010 Functions – Synchronization
Effective use of nominal radio bandwidth allocated to
Ethernet traffic.
Measures the average packet delay.
Counts packets. Reported for LAN and WAN ports on
both L2R and R2L direction.
29
Advertisement
Table of Contents
