Advertisement
Insert Castors (P10x5) into the Star Base (P9) as shown, pushing down firmly on each castor
to ensure they are fixed in position. Insert the Gas Lift (P8) into the top of the Star Base (P9).
Place the Gas Lift Cover (P7) over the top of the Gas Lift (P8) as shown.
2x 32mm
4x 35mm
Bolts (H1)
Bolts (H2)
6x Washers
Allen Key
(H7)
Align the holes on the Arms (P3 & P4) with the bottom of the Seat (P5) and
use the Allen Key (H8) to fasten 2x 32mm Bolts (H1), 4x 35mm Bolts (H2) and
6x Washers (H7) to the seat as shown.
Ensure the the Arms (P3 & P4) are facing the correct direction before
securing to the base of the Seat (P5).
(P9)
(P10)
(P10)
(H8)
(P7)
(P8)
(P10)
(P10)
(H8)
(H2)
(H1)
(H7)
(H7)
(P4)
(P10)
(H1)
(H2)
(H7)
(H7)
(P3)
(P5)
Advertisement
