Fig. 19: Steps For Fastening The High-Pressure Stage - ABB Turbo Systems Switzerland Power2 550-M44 Operation Manual

Operation Manual / Power2 550-M / High-pressure stage
3 Removal and installation / 3.3 Installing the high-pressure stage
3.3.3 Steps for fastening the high-pressure stage
Fig. 19: Steps for fastening the high-pressure stage
1. Tighten the clamping nuts (42201) (see section Tightening the clamping nut).
2. Connect the cable connector (86515) to the speed sensor.
© Copyright 2022 ABB. All rights reserved. HZTL4058_EN Rev.F March 2022