Siemens SIMATIC S7-1500 Equipment Manual page 22

Article number
Digital outputs
Type of digital output
Number of digital outputs
Current-sourcing
Digital outputs, parameterizable
Short-circuit protection
•
Size of motor starters according to NEMA, max.
Switching capacity of the outputs
•
•
Output voltage
•
Output current
•
•
•
•
Output delay with resistive load
•
•
Parallel switching of two outputs
•
•
•
Switching frequency
•
•
•
Total current of the outputs
•
•
•
Cable length
•
•
Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)
Equipment Manual, 12/2021, A5E03485733-AE
built-in fuse
with resistive load, max.
on lamp load, max.
for signal "1", min.
for signal "1" rated value
for signal "1" permissible range, min.
for signal "1" permissible range, max.
for signal "0" residual current, max.
"0" to "1", max.
"1" to "0", max.
for logic links
for uprating
for redundant control of a load
with resistive load, max.
with inductive load, max.
on lamp load, max.
Current per channel, max.
Current per group, max.
Current per module, max.
shielded, max.
unshielded, max.
Technical specifications
6ES7522-5FF00-0AB0
Triac
8
Yes
Yes
No
6.3 A melting fuse, slow-blow
5
2 A
50 W
L1 (-1.5 V) at maximum output current; L1 (-8.5
V) at minimum output current
2 A
10 mA
15 A; max. 1 AC cycle
2 mA
1 AC cycle
1 AC cycle
No
No
Yes
10 Hz
0.5 Hz
1 Hz
2 A; see additional description in the manual
2 A; see additional description in the manual
10 A; see additional description in the manual
1 000 m
600 m
21