Siemens SIMATIC S7-1500 Equipment Manual page 10

The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output (MSO)
Configurable after interface module
IM 155-5 DP ST
Switching cycle counter
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following components are supplied with the module and can also be ordered separately
as spare parts:
• Labeling strips
• U connector
• Universal front door
Other components
The following component can be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find more information on accessories in the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)
Equipment Manual, 12/2021, A5E03485733-AE
Firmware ver-
sion of the
module
V1.0.0 or V12 or higher
higher
V1.0.0 or V12 or higher
higher
V1.0.0 or V12 or higher
higher
V2.0.0 or V13 Update 3 or higher
higher
(PROFINET IO only)
V2.0.0 or V13 or higher
higher
V2.2.0 or V16, Update 4
higher or higher with HSP 0343 or
V17 or higher with HSP 0343
(PROFINET IO only, central
operation with a S7-1500 CPU
is supported)
Configuration software
STEP 7
(TIA Portal) (TIA Portal) V12 or higher,
Product overview
2.1 Properties
GSD file in STEP 7
or STEP 7 V5.5 SP3 or
higher
--- / X
X
X
X
(PROFINET IO only)
X
X
(PROFINET IO only)
9